Net-optics 10 GigaBit In-Line Regeneration Taps Bedienungsanleitung PDF herunterladen (Seite 9)

10 GigaBit In-Line Regeneration Tap

Installing the 10 GigaBit Regeneration Tap

The Regeneration has two network connectors are labeled A and B. Depending

on your Tap model, there are either four or eight connectors for monitor devices.

Warning: The intended use of this product is in systems that contain lasers. Use

caution when handling unconnected ber.

DANGER: Invisible Laser Radiation when open or when operating with ber

disconnected. AVOID DIRECT EXPOSURE TO THE BEAM. Never operate

unit with a broken ber or with a ber connector disconnected.

CAUTION: There are no user serviceable parts inside. Refer all servicing to

qualied Net Optics service personnel.

To mount and power the Regeneration Tap:

1. If you are rack mounting the Regeneration Tap, insert the Tap in an available

one rack unit space and secure with the four fasteners included with the Tap.

2. Check that connector dust covers are in place.

3. Connect the redundant power connectors to separate power sources.

4. Secure the AC power cables with the connector clips.

5. Check the power LEDs to verify that the Tap is receiving power.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

Keine Kommentare

Net-optics 10 GigaBit In-Line Regeneration Taps Bedienungsanleitung Seite 9